Hadco LED Bullyte BLN5D4 & BLW5D4 Spots & Flood Die-cast marine grade aluminum alloy bullet landscape lighting

BLN5D4-A LED Bullyte - Spot
BLN5D4-H LED Bullyte - Spot
BLW5D4-A LED Bullyte - Flood
BLW5D4-H LED Bullyte - Flood

Housing: Die-cast marine grade aluminum alloy. Fully rotatable shroud, double gasketed, die-cast marine grade alloy aluminum. Fully-adjustable swivel arm with vibration-proof locking teeth. 1/2 " NPS male threads to screw on to accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. Gasketing is silicone.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Optical Assembly: Integral collimating flood (25°) optics. Clear tempered glass affixed at 10° angle for natural cleaning.

Lamping: Type 3 Luxeon® high-output LEDs powered at 700mA to operate for 50,000 hours.

Electrical Assembly: Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Warranty: Three-year limited warranty.

Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.

IP Rating: IP66: Dust-tight and sealed against direct jets of water.
Height: 2 3/8" (60mm)
Width: 2 13/16" (71mm)
Length: 5 13/16" (147mm)
Max. Weight: 2.6 lb.

Finish: A Black, H Bronze

Hadco BUL16 Composite (BC16)

BUL16-A Black
BUL16-G Verde
BUL16-H Bronze

• 12 Volt
• Clear Tempered Lens
• 50 watt maximum
• MR16 Lamp
• 1/2" N.P.S. fitter

Housing - One-piece injection molded Ryton PPS with fully adjustable swivel
arm with vibration-proof locking teeth.

Shroud - Fully rotatable, gasketed, composite.

Finish - Color impregnated material in black, hand rubbed verde antiqued over black, or bronze.

Lens - Clear tempered glass affixed at 10° angle for natural cleaning.

Socket - Bi-pin type (GU5.3).

Wiring - Pre-wired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable.

UL, cUL Listed.

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco 120 Volt BT711 Aluminum Bullet

Encapsulated Integral Transformer Converts existing 120 volt systems for use with energy-efficient halogen lamps.

BT711-A - Black
BT711-G - Verde
BT711-H - Bronze

• 120 volt
• 35 watt maximum (MR11)
• 20 watt maximum (T3 halogen)
• 1/2" NPS fitter
• Integral stepdown transformer

Housing - Cast aluminum with fully adjustable swivel arm, with vibration-proof locking teeth.

Shroud - Fully rotatable, gasketed, cast aluminum.

Finish - UV stable polyester powdercoat for excellent weatherability. Available in black, verde or bronze.

Lens - Clear tempered glass.

Socket - Ceramic bi-pin quartz socket for use with G4 lamps.

Electrical - Stepdown transformer reduces line voltage to 12 volts. Transformer is potted/encapsulated and features thermal overload protection.

Wiring - Pre-wired with #18 AWG black, white and ground.

UL, cUL Listed

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco 120 Volt BT5016 Aluminum Bullet

Encapsulated Integral Transformer Converts existing 120 volt systems for use with energy-efficient halogen lamps.

BT5016-A - Black
BT5016-G - Verde
BT5016-H - Bronze

• 120 volt
• 50 watt maximum
• MR16
• 1/2" NPS fitter
• Integral stepdown transformer

Housing - Cast aluminum with fully adjustable swivel arm, with vibration-proof locking teeth.

Shroud - Fully rotatable, gasketed, cast aluminum.

Finish - UV stable polyester powdercoat for excellent weatherability. Available in black, verde or bronze.

Lens - Clear tempered glass affixed at 10 degree angle for natural cleaning.

Socket - Ceramic bi-pin quartz socket for use with GU5.3 lamps.

Electrical - Stepdown transformer reduces line voltage to 12 volts. Transformer is potted/ encapsulated and features thermal overload protection.

Wiring - Pre-wired with #18 AWG black, white and ground.

UL, cUL Listed

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco 120 Volt BT1 Aluminum Bullet

Encapsulated Integral Transformer Converts existing 120 volt systems for use with energy-efficient halogen lamps.

BT1-AL - Black, Long Shroud
BT1-HL - Bronze, Long Shroud
BT1-AS - Black, Short Shroud
BT1-HS - Bronze, Short Shroud

• 120 volt
• 75 watt maximum
• MR16
• 1/2" NPS fitter
• Integral stepdown transformer

Housing - Cast aluminum with fully adjustable swivel arm, with vibration-proof locking teeth.

Shroud - Fully rotatable, gasketed, cast aluminum (short and long shroud options).

Finish - UV stable polyester powdercoat for excellent weatherability. Available in black or bronze.

Lens - Clear tempered glass.

Socket - Ceramic bi-pin quartz socket for use with GU5.3 lamps.

Electrical - Stepdown transformer reduces line voltage to 12 volts. Transformer is potted/ encapsulated and features thermal overload protection.

Wiring - Pre-wired with #18 AWG black, white and ground.

UL, cUL Listed

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BL711 12 Volt Aluminum

BL711-A Black
BL711-G Verde
BL711-H Bronze
BL711-T Speckled Stone
BL711-U Sienna

• 12 Volt
• 35 watt maximum (MR11 Lamp)
• 20 watt maximum (T3 halogen)
• 1/2" N.P.S. fitter

Housing– Die cast aluminum with fully adjustable swivel arm with vibration-proof locking teeth.

Shroud– Fully rotatable, gasketed, cast aluminum.

Finish– Black, hand rubbed verde antiqued over black thermoset powder coat, bronze, sienna or speckled stone thermoset powder coat.

Lens– Clear tempered glass.

Socket– Bi-pin type (G4).

Wiring– Prewired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable. UL, cUL Listed.

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BL756 12 Volt Aluminum

BL756-A Black
BL756-G Verde
BL756-H Bronze
BL756-T Speckled Stone
BL756-U Sienna

• 12 Volt
• 27 watt maximum
• 1156 Lamp (included)
• 1/2" N.P.S. fitter

Housing– Die cast aluminum with fully adjustable swivel arm with vibration-proof locking teeth.

Shroud– Fully rotatable, gasketed, cast aluminum.

Finish– Black, hand rubbed verde antiqued over black thermoset powder coat, bronze, speckled stone or sienna thermoset powder coat.

Lens– Clear tempered glass.

Socket– Single contact bayonet (S-8).

Wiring– Prewired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable.

UL, cUL Listed.

Power Consoles, Transformers, Stakes, Posts & Accessories >

Hadco BL16 Brass

BL16-N Natural Brass
BL16-OB Oiled Brass

• 12 Volt
• 50 watt maximum
• MR16 Lamp
• Long Shroud
• 1/2" N.P.S. fitter

Housing - Die cast brass with fully adjustable swivel arm with vibration-proof locking teeth.

Shroud - Fully rotatable, gasketed, cast brass.

Finish - Natural brass or oiled brass.

Lens - Clear tempered glass affixed at 10 degree angle for
natural cleaning.

Socket - Bi-pin type (GU5.3).

Wiring - Pre-wired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable.

UL, cUL Listed.

Power Consoles, Transformers, Stakes, Posts & Accessories >

MGM1 Louver MLB1 Ice Blue Lens MLS1 Spread Lens

Hadco CUL16 12 Volt Copper Accent Lighting

CUL16 Copper

• 12 Volt
• 35 watt maximum (20 watt included)
• MR16 lamp
• 1/2" NPS fitter

Material– Machined solid copper with fully adjustable natural brass swivel arm and brass fastener.

Finish– Natural copper will patina with age.

Lens– Clear tempered glass.

Socket– Bi-pin type.

Wiring– Pre-wired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable.

UL, cUL Listed.

See More Copper Landscape Lighting >

Hadco BU4 Composite (BC4)

Standard 120 Volt

BU4-A Black
BU4-G Verde
BU4-H Bronze

• 120 Volt
• 150 watt maximum
• PAR38/R40 Lamp
• 1/2" N.P.S. fitter
• Shrouds optional
• H.I.D. compatible

H.I.D. Models

BUN4-AL Black, Long Shroud, Narrow Reflector
BUN4-HL Bronze, Long Shroud, Narrow Reflector
BUN4-AS Black, Short Shroud, Narrow Reflector
BUN4-HS Bronze, Short Shroud, Narrow Reflector
BUW4-AL Black, Long Shroud, Wide Reflector
BUW4-HL Bronze, Long Shroud, Wide Reflector
BUW4-AS Black, Short Shroud, Wide Reflector
BUW4-HS Bronze, Short Shroud, Wide Reflector

• 120 Volt
• 175 watt maximum
• E17 Lamp
• 1/2" N.P.S. fitter
• Order remote ballast housing

Housing - One-piece injection molded Ryton PPS with fully
adjustable swivel arm with vibration-proof locking teeth.

Shroud - BU4, optional (see below). BUN4 and BUW4
shroud included.

Finish - Color impregnated material in black, hand rubbed
verde antiqued over black, or bronze.

Lens - BUN4, BUW4 clear convex tempered glass included with shroud. BU4 lens provided with optional shroud only.

Socket - Porcelain medium base.

Wiring - Pre-wired with high temperature #18 wire.

UL, cUL Listed.

	ML4 Louver for BU4
	Shrouds for BU4 4CGLC and 4CHSC

finishes and Materials

Hadco makes it easier than ever to select the right color for your exquisite landscape
design with a full palette of colors and textures. Expand your design capabilities with new finishes that are sure to compliment your commercial or residential landscape lighting needs.

For an aged appearance, Oiled and Verde Brass materials have been added to the NightLife fixture choices for a step back in time.

And for more earthy settings, there is the Speckled Stone finish, which is at home among foliage as well as any number of masonry materials.