Hadco ULW5D4
One-piece injection molded ULTEM® High
Performance Polymer composite. Lens ring
is a Single-piece injection molded ULTEM®
High Performance Polymer with gasketed lens.
Twist-off operation for ease of maintenance.
Fasteners are 300 series stainless steel.
Finish: Composite is textured, pressure
formed, molded-in-color.
Optical Assembly: Integral collimating
flood (25°) optics. Clear convex lens,
high temperature glass furnished with silicone
O-ring for watertight seal.

H= Bronze
|
Lamping: Type 3 Luxeon® high-output
LEDs powered at 700mA to operate for 50,000
hours.
Electrical Assembly: Input voltage range
(VAC): 10.8 - 17.5. Input frequency: 60Hz.
Integral surge protector built into LED
driver circuit. 12 volts, 12.4 total watts.
Standard 10 ft. 16-3 AWG, 105° C, STOW
water-resistant cord. Fixture is pre-wired
and potted to prevent water entry. 12 Volt
system requires remote transformer, not
included.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
IP Rating: IP66/68 to 1M (3.28FT): Dust-tight
and dual rated - sealed against direct jets
of water and against continuous immersion
up to a depth of 1 meter (3.28 feet). |