16" Picture Light for Frame
18" x 24" to 24" x 30"
SL16-7 3-Light
Black
$177.70
SL16-9 3-Light
White
$177.70
SL16-51 3-Light
Satin Brass
$172.30
SL16-52 3-Light
Satin Nickel
$203.70
SL16-61 3-Light
Polished Brass
$172.30
SL16-62 3-Light
Chrome
$203.70
SL16-71 3-Light
Antique Brass
$177.70
SL16-76 3-Light
Weathered Brass
$177.70
SL16-91
3-Light
Oil Rubbed Bronze
$177.70
21" Picture Light for Frame
24" x 30" to 36" x 48"
SL21-7 4-Light
Black
$187.50
SL21-9 4-Light
White
$187.50
SL21-51 4-Light
Satin Brass
$192.10
SL21-52 4-Light
Satin Nickel
$228.10
SL21-61 4-Light
Polished Brass
$192.10
SL21-62 4-Light
Chrome
$218.10
SL21-71 4-Light
Antique Brass
$187.50
SL21-76 4-Light
Weathered Brass
$187.50
SL21-91
4-Light
Oil Rubbed Bronze
$187.50
30" Picture Light for Frame
36" x 48" to 48" x 60"
SL30-7 6-Light
Black
$228.90
SL30-9 6-Light
White
$228.90
SL30-51 6-Light
Satin Brass
$225.30
SL30-52 6-Light
Satin Nickel
$275.70
SL30-61 6-Light
Polished Brass
$227.10
SL30-62 6-Light
Chrome
$275.70
SL30-71 6-Light
Antique Brass
$230.70
SL30-76 6-Light
Weathered Brass
$230.70
SL30-91
6-Light
Oil Rubbed Bronze
$230.70
40" Picture Light for Frame
48" x 60 or more
SL40-7 8-Light
Black
$290.10
SL40-9 8-Light
White
$290.10
SL40-51 8-Light
Satin Brass
$281.10
SL40-52 8-Light
Satin Nickel
$331.50
SL40-61 8-Light
Polished Brass
$281.10
SL40-62 8-Light
Chrome
$331.50
SL40-71 8-Light
Antique Brass
$290.10
SL40-76 8-Light
Weathered Brass
$290.10
SL40-91
8-Light
Oil Rubbed Bronze
$290.10
Tech
Lighting Joshua and Meg Picture Lights
These elegant, unobtrusive picture lights
are designed to properly illuminate artwork
without glare. Mounting bracket is grooved
to hold picture hanging wire securely. Maximum
weight of picture 50 lbs. By changing lamps
or adding a lens, Joshua can light an area
as small as four inches square or as large
as four feet square, and Meg can light an
area as small as eight inches square or
as large as two feet square. See chart below.
J-Box mount version mounts to any standard
juction box. Plug-in version has 10’ cord
with plug-in transformer.
Dimming: Joshua J-box and Meg J-box are
dimmable with a standard incandescent dimmer.
Finish: Chrome, gold, black.
Lamping: Low-voltage 12 volt Halogen MR16
up to 50 watts or less. (UV-protected 50
watt 38o MR16 included with Joshua, 20 watt
36o MR16 lamp included with Meg.)
Accessory: Lil Wok accessory with Snap
Louver Lens Holder included. Diffusor or
Spread Lens available separately.
Call 954-456-1006
for more information on pricing & shipping.
700JOSCPB
Joshua Picture LT MR16 J-BOX Black
$76.00
700JOSCPC
Joshua Picture LT MR16 J-BOX Chrome
$76.00
700JOSPLB
JoshuaPicture LT MR16 Plug-in Black
$76.00
700JOSPLC
JoshuaPicture LT MR16 Plug-in Chrome
$76.00
700MEGCPB
Meg Picture Lite MR16 J-BOX Black
$76.00
700MEGCPC
Meg Picture Lite MR16 J-BOX Chrome
$76.00
700MEGPLB
Meg Picture Lite MR16 Plug-in Black
$76.00
700MEGPLC
Meg Picture Lite MR16 Plug-in Chrome
$76.00
Lil
Wok Accessory 700LMPCO
Each Meg or Joshua picture light includes
a matching Lil Wok accessory, lens holder
clip, and UV-protected MR16. Additional
accessories may be ordered.
3" x 1.6"
Decorative metal shade reduces backlight
from MR16. Includes Snap Louver Lens Holder.
Holds a single lens or louver.
Color: Antique bronze, black, copper, silver.
Lamp: Black, gold, silver: Low-voltage
MR16 lamp up to 50 watts (not included).
Antique bronze, copper: Low-voltage MR16
up to 20 watts (not included).
Call 954-456-1006
for more information on pricing & shipping.
700LMPCB
Lil Wok, Black
$17.60
700LMPCOCP
LIL Wok, Copper
$17.60
700LMPCOS
LIL Wok, Satin Nickel
$17.60
700LMPCOZ
LIL Wok, Antique Bronze
$17.60
House of Troy Advent-Gemini
AG Series Picture Light
House
of Troy Advent-Gemini Picture Lights AG
Series
Bulbs: 50 Watt MR16 Bulb included
Finishes: Black, Satin Nickel, Satin Brass
UV filtered 50 Watt Halogen bulb included
Shade and arm adjust for maximum illumination
Installation hardware included
Transformer included
Easy Installation
Life-Time Guarantee
Lengths: 6", 11", 16", 21",
30", 40"
Finishes: Satin Brass, Black, Satin Nickel
Single
6 pack
AG-7
Black
$80.50
$331.50
AG-51
Satin Brass
$80.50
$331.50
AG-52
Satin Nickel
$80.50
$331.50
CP1 Clamp-On Display Fixture, shown with
Mesh Backlight Shield Accessory, sold separately
Tech
Lighting CP Display Fixtures
CP1 Clamp-On Light
Light weight and versatile, CP1 features
a universal clamp that provides a secure
grip on any surface shape-from 1/2"
pipe to 4" wall. Arms telescope from
9" to 25", and angle up and down
180o; the lamp rotates 330o and the CP1
holds steady however it"s positioned.
It automatically shuts itself off then turns
on again when short is corrected.
Finish: Chrome arms; black or white clamp.
Installation: 10 foot cord and plug with
50 watt or 75 watt 12 volt transformer (included).
No tools necessary to install or to replace
lamp. Lamp: CP1 with 50 watt transformer:
low-voltage Halogen MR16 lamp up to 50 watts
(not included). CP1 with 75 watt transformer:
low-voltage Halogen MR16 lamp up to 75 watts
(not included). See accessory for maximum
wattage usage.
CP Screw On Display Fixture, shown with
Mesh Backlight Shield Accessory, sold separately
Tech
Lighting CP Display Fixtures
CP Screw On
Designed with special screw-on bracket
to fit lightweight portable booths. Arms
telescope from 9" to 25", and
angle up and down 180o; the lamp rotates
330o and the CP1 holds steady however it’s
positioned. It automatically shuts itself
off then turns on again when short is corrected.
Installation: Leave two screws in or on
top of the wall for quick mounting of the
keyhole bracket. Complete with 12 volt 50
or 75 watt plug-in transformer and 10’ cord,
plugs into a standard outlet.
Finish: Chrome arms; chrome or black bracket.
Lamp: CP Screw-On with 50 watt transformer:
low-voltage, Halogen MR16 lamp up to 50
watts (not included). CP Screw-On with 75
watt transformer: low-voltage, Halogen MR16
lamp up to 75 watts (not included). See
accessory for maximum wattage usage.
Pre-Wired with UL Listed Direct Burial
Wire/Cable
Remote 12V Transformer Not Included
ETL Approved
Dimensions: 29 5/8" including Flexible
Arm
Head 5" x 3"
Mount 2 5/8"
Tech
Lighting Lite Clamp Fixtures
LC-Archie Lite
Sleek, lightweight Lite Clamp fixtures
were specially designed for banner frames
and portable booths. 17.5" long, 10"
Height of arch. Pivots at head to direct
the beam.
Installation: The round clamp grips securely
to a panel as slim as 1/4" or as thick
as 1". The banner channel allows a
tight hold to 5/16" banner frames.
The Length of the fixture may be adjusted
by sliding the arms back and forth through
the clamp. Includes 12 volt, 75 watt plug-in
transformer on a 10’ cord to plug into a
standard outlet. Cord disconnects from fixture
for easy repacking.
Finish: Chrome arms with black clamp. Lamp:
Low-voltage Halogen MR16 lamp up to 75 watts
(not included). See accessory for maximum
wattage usage.
Sleek, lightweight Lite Clamp fixtures
were specially designed for banner frames
and portable booths. Extends up to 17.5"
from clamp, 3" Height of arc. Use coated
handle to direct the beam.
Installation: The round clamp grips securely
to a panel as slim as 1/4" or as thick
as 1". The banner channel allows a
tight hold to 5/16" banner frames.
The Length of the fixture may be adjusted
by sliding the arms back and forth through
the clamp. Includes 12 volt, 75 watt plug-in
transformer on a 10" cord to plug into
a standard outlet. Cord disconnects from
fixture for easy repacking.
Finish: Chrome arms with black clamp.
Lamping: Low-voltage Halogen MR16 lamp
up to 75 watts (not included). See accessory
for maximum wattage usage.
Sleek, lightweight Lite Clamp fixtures
were specially designed for banner frames
and portable booths. Available in 12"
and 24" arm Lengths. Use coated handle
to direct the beam.
Installation: The round clamp grips securely
to a panel as slim as 1/4" or as thick
as 1". The banner channel allows a
tight hold to 5/16" banner frames.
The Length of the fixture may be adjusted
by sliding the fixture arms back and forth
through the clamp. Includes 12 volt, 75
watt plug-in transformer on a 10" cord
to plug into a standard outlet. Cord disconnects
from fixture for easy repacking.
Finish: Chrome arms with black clamp.
Lamp: Low-voltage Halogen MR16 lamp up
to 75 watts (not included). See accessory
for maximum wattage usage.
Call 954-456-1006
for more information on pricing & shipping.
700LCWAL12C
Lite Clamp Wally 12"
$84.00
700LCWALC
Lite Clamp Wally 24"
$84.00
700CP1-BK
CP1 Clamp-on Extender 50W Black
$76.00
700CP1-WH
CP1 Clamp-on Extender 50W White
$76.00
700CP17BK
CP1 Clamp-on Extender 75W Black
$88.00
700CP17WH
CP1 Clamp-on Extender 75W White
$88.00
700CPEXTB
CP-Cord Extender, Black
$32.00
700CPEXTW
CP-Cord Extender, White
$32.00
XPL-4-XX 4-Bulb
Unit
Polished Brass, Bronze,
Chrome and Black
NSL
National Specialty Lighting Xenon Picture
Light Units
Self-contained Task Light Fixture in four
fixture sizes from 6.5" to 30"
and four Finishes: Polished Brass, Bronze,
Chrome and Black.
No harmful UVs, cooler than halogen, brighter
than fluorescent, four times the bulb life,
greater light output, solid brass design
and construction. The new benchmark in picture
lighting.
Each Xenon Picture Light ships with bulb(s),
transformer(s) and 8' interconnecting cord.
Additional 8' extension cords are listed
below.
WAC Surface Mounted Low Voltage Flexible
Light MM-204, shown with MBS16 Mesh Bulb
Shield, not included. Snaps over an MR11
or MR16 bulb and diffuses glare from the
back of the bulb.
WAC
Surface Mounted Low Voltage Flexible Light
MM-204
MM-204-BK $38.00 ( $32.00 with minimum
order)
MM-204-BN $44.00 ( $37.00 with minimum order)
MM-204-WT $38.00 ( $32.00 with minimum order)
Flexible fixtures provide ease of aiming.
The "MI" and "MM" mini
canopies use remote transformers and are
Widely used for display work. MM-204 requires
behind the surface access. Display fixture
requires rear access for mounting.
Socket: Bi-pin ceramic with 18 gauge Teflon
insulated wires, sleeves.
Transformer: Requires a remote transformer
(not supplied).
Lamping: Re-lamps from the front. Accepts
MR16 or MR11 protective glass covered lamps.
An accessory lens can be used with a standard,
uncovered MR16G lamp (lens clip must be
used, specify LENS-16-CLIP).
Remote transformer required (sold separately).
Options / Accessories
Lens Options: Colored, Colored Dichroic,
Ultra Violet, Beam Elongating, and Spread
lenses, Honey Comb Louver to be used with
a Lens Clip and a protective glass covered
MR16G lamp. Specify LENS-16 CLIP (only available
in the MR16 size)
Mesh and solid bulb shields are available
for both MR16 and MR11 sizes, but cannot
be used in conjunction with a lens clip.
WAC
Surface Mounted Line Voltage Flexible Light
MO-024 & MO-048
The "MO" series mounts easily
to ceiling junction boxes. They feature
adjustable socket depth, which allows a
snug fit with a variety of lamp choices.
Optional barn door accessories snaps over
PAR lamps.
DL-007-BK $106.00 ( $90.00 with minimum
order)
DL-007-WT $106.00 ( $90.00 with minimum
order)
Low voltage models include a 60W 3-prong
grounded "plug–in" class
II electronic transformer and a 2"
Clamp. The transformer has a built in
on-off switch and a detachable 12ft cord.
60W Plug-In transformer.
Finish BK-Black, WT-White
Lamp MR16 (not included)
Wattage 50w Max
Two additions to the popular series
of display lights by W.A.C. are the new
DL-167 and DL-168. These two models bring
a whole new level of versatility and ease
of use to these important lighting tools.
Thoughtful new arm designs provide greater
range of motion than previous models,
making them even more useful than before.
Low voltage models include a 60W 3-prong
grounded "plug–in" class
II electronic transformer and a 2"
clamp. The transformer has a built in
on-off switch and a detachable 12ft cord.
60W Plug-In transformer.
Finish BK-Black
Lamp MR16G (not included)
Wattage 50w Max
WAC
DL-168 Low Voltage Clamp Mount Display Lights
DL-168-BK $113.00 ( $96.00 with minimum
order)
DL-168-PT $119.00 ( $101.00 with minimum
order)
DL-168-WT $113.00 ( $96.00 with minimum
order)
Two additions to the popular series
of display lights by W.A.C. are the new
DL-167 and DL-168. These two models bring
a whole new level of versatility and ease
of use to these important lighting tools.
Thoughtful new arm designs provide greater
range of motion than previous models,
making them even more useful than before.
Low voltage models include a 60W 3-prong
grounded "plug–in" class
II electronic transformer and a 2"
Clamp. The transformer has a built in
on-off switch and a detachable 12ft cord.
60W Plug-In transformer.
Finish BK-Black, PT-Platinum, WT-White
Wattage 50w Max
DL-214-BK $87.00 ( $74.00 with minimum
order)
DL-214-WT $87.00 ( $74.00 with minimum order)
Low voltage models include a 60W 3-prong
grounded "plug–in" class
II electronic transformer and a 2"
Clamp. The transformer has a built in
on-off switch and a detachable 12ft cord.
17.5" long, with a 10" swooping
curve. Pivots at head to direct the beam.
DisplayJack elements provide an easy lighting
solution for exhibit booths and displays.
Installation: Install a DisplayJack canopy
or connector ports (sold separately) and
push the DJ-Archie’s arm’s into the canopy
or ports. After the show, pull out DJ-Archie—the
canopy or ports stay in place for next time
with no need for an electrician.
Finish: Chrome only. Lamp: Low-voltage
Halogen MR16 lamp up to 75 watts (not included).
See accessory for maximum wattage usage.
18" long with a 3" high gentle
curve. Pivots at head to direct beam. DisplayJack
elements provide an easy lighting solution
for exhibit booths and displays.
Installation: Install a DisplayJack canopy
or connector ports (sold separately) and
push the DJ-Georgi’s arm’s into the canopy
or ports. After the show, pull out DJ-Georgi—the
canopy or ports stay in place for next time
with no need for an electrician.
Finish: Chrome only. Lamp: Low-voltage
Halogen MR16 lamp up to 75 watts (not included).
See accessory for maximum wattage usage.
Telescopes from 9" to 25" from
mounting point and pivots 180o at base of
element. DisplayJack elements provide an
easy lighting solution for exhibit booths
and displays.
Installation: Install a DisplayJack canopy
or connector ports (sold separately) and
push the DJ-Telescopes arm’s into the canopy
or ports. After the show, pull out DJ-Telescope—
the canopy or ports stay in place for next
time with no need for an electrician.
Finish: Chrome only.
Lamp: Low-voltage Halogen MR16 lamp up
to 75 watts (not included). See accessory
for maximum wattage usage.
12" or 24" long and field-cuttable.
Pivots at head to direct beam. Field-cuttable.
DisplayJack elements provide an easy lighting
solution for exhibit booths and displays.
Installation: Install a DisplayJack canopy
or connector ports (sold separately) and
push the DJ-Wally Lite’s arm’s into the
canopy or ports. After the show, pull out
DJ-Wally—the canopy or ports stay in place
for next time with no need for an electrician.
Finish: Chrome only.
Lamp: Low-voltage Halogen MR16 lamp up
to 75 watts (not included). See accessory
for maximum wattage usage.
To Order:
Barn
Door Accessories
